为何这段对话加了判定条件，还是所有领主都会出现选项

随遇而安~

1. [anyone|plyr,"lord_talk", [
   
2.    (try_begin),
   
3.     (eq,"$chushi",2),
   
4.     (eq,"$g_talk_troop", "trp_knight_2_21"),
   
5.    (else_try),
   
6.     (eq,"$chushi",3),
   
7.     (eq,"$g_talk_troop","trp_knight_3_20"),
   
8.    (else_try),
   
9.     (eq,"$chushi",4),
   
10.     (eq,"$g_talk_troop","trp_knight_4_21"),
    
11.    (else_try),
    
12.     (eq,"$chushi",5),
    
13.     (eq,"$g_talk_troop","trp_knight_5_21"),
    
14.    (try_end),
    
15.     (eq,"$renwu",2),
    
16.    
    
17.   ],
    
18.    "I've done what you asked me to do.", "lord_talk_duihua",[]],

复制代码

条件是只有上面4个领主才有这个选项，但貌似没作用，每个领主包括国王也有

随遇而安~

野蛮人y 发表于 2023-12-23 21:20
只有满足chushi条件的领主能看到是吧，前面设置满足条件的领主变量不就行了，循环后判定

   (assign,":pas ...

多谢，没想到增加一个变量来判断

野蛮人y

只有满足chushi条件的领主能看到是吧，前面设置满足条件的领主变量不就行了，循环后判定

   (assign,":pass_troop", -1),
   (try_begin),
                (eq,"$chushi",2),
                (assign,":pass_troop", "trp_knight_2_21"),
   (else_try),
                (eq,"$chushi",3),
                (assign,":pass_troop","trp_knight_3_20"),
   (else_try),
                (eq,"$chushi",4),
                (assign,":pass_troop","trp_knight_4_21"),
   (else_try),
                (eq,"$chushi",5),
                (assign,":pass_troop","trp_knight_5_21"),
   (try_end),
   (eq,"$g_talk_troop",":pass_troop"),
   (eq,"$renwu",2),

随遇而安~

野蛮人y 发表于 2023-12-23 18:06
逻辑都不对，请问前面的循环和后面的判定等式有什么关联，chushi  和renwu也是要判定的参数吗
只需判定领主 ...

我之前已经试过this_or_next了 确实是只有这几个领主有 但是在判定方面也是这几个领主都有，$chushi是前置任务随机赋予的值 ，这段对话大概意思就是  $chushu值为1  那对话就值有领主1有，为2就只有领主2有，

野蛮人y

逻辑都不对，请问前面的循环和后面的判定等式有什么关联，chushi  和renwu也是要判定的参数吗
只需判定领主四句就行：
(this_or_next|eq,"$talk_troop","领主1"),
(this_or_next|eq,"$talk_troop","领主2"),
(this_or_next|eq,"$talk_troop","领主3"),
(eq,"$talk_troop","领主4"),
还有其他条件就补，

chushi是不同领主就要等于不同值吗，前面再定义一个判定变量，置0，
不同领主满足chushi条件，就置1，循环后面再判定是否等于1